Swinger Kit w/ Base & Round Plate
New Style Swinger is coming out that has more adjustability. More pictures coming soon.
This swinger is probably the most portable and versatile swinger target on the market for a gravity swinger, and it can ship in a flat rate box. Our system allows you to put multiple cardboard targets on the same stand (with purchase of additional 1x2 adapters), and if you want and put a steel plate on the same stand so you can use the cardboard targets as no shoots. For setting up a competition stage with multiple swinger no shoots, this would be a significant time saver during set up. We also off a very simple trigger system that can be set up as a shoot trigger using a piece of conduit and our HC T post slotted gong hanger, a hand pull trigger, or hooked to a popper as the trigger. You can also place more than one swinger on the same stand to create an extremely difficult shot configuration if you have the swinging in opposite directions as no shoots with a steel plate behind them that must be hit after triggering both swingers. The possibilities are endless with our super modular swinger kit. Shoot Activator parts are not part of the kit.
Basic swinger kit w/ trigger finger
Round 3/8" AR500 plate with 1/2" Bolt Holes
2x4 post base (optional)
Not included, but needed for set up:
1 pieces of 3/4" IMC or Rigid conduit, 1" OD pipe, or 1" square tube at 18"
A 2x4, anything 2' or longer will work
2 - 1x2s at 4' to staple cardboard target to
A cardboard target
And a cable or rope to pull the trigger pole to activate
Weighting these down with sand bags is sometimes needed and will make it swing more consistently for competitions.