First Class Target Systems
Free Shipping in the U.S. on all orders over $300
$25 flat shipping on all other orders.
Prices may change at anytime due to steel cost.
Welcome to the most Innovative Target Systems on the Planet,
and we are always looking to improve them even more.
Please let us know if we can help in any way. Thanks for visiting our site.
and we are always looking to improve them even more.
Please let us know if we can help in any way. Thanks for visiting our site.
"The Ripper" Vertical Activator
$15.00 - $180.00
Compact activator for use with our Rhino Knock Downs or wall mount.
Rhino plates and hangers are sold separately, or we have other packages with plates and hangers included.
Ultimate Swinger Kit
$30.00 - $475.00
This Ultimate Swinger is probably the most versatile swinger on the market. Also comes with one of our adjustable height clamp-on trigger fingers. We have reconfigured the standard swinger to be easily upgraded to a steel plate swinger for a better value for all users. This change was mainly a longer swinger arm, but the new swinger stands are now completely made of AR plate steel that bolts together for a flexible but very strong stand that will take a beating.
Kits Includes:
16" Swinger Kit w/ Hardware
Adjustable Trigger Finger (ST-TR-TP)
8.5"x11"x3/8" Main Counterweight Plate (9.8#)
Ultimate Swinger Stand
Additional add-on counter weight plates can be added on for faster and/or longer swing times. These are sold Separately but will definitely be needed if adapted for a steel plate swinger.
Not included, but needed for set up:
2 - 1x2s at 3-4' to staple cardboard target to
A cardboard target
And a cable to pull the trigger for activation
"Holy Monkey" Swinger Kit
$765.00
$650.00
This is the new "Holy Monkey" swinger kit as seen in the videos on social media that started on May 5, 2020. Only components needed to finish setting up will be a stick or piece of pipe to mount our adjustable activator trigger piece on, some short target sticks, some stakes, and a target, besides whatever popper or other activator prop you want to use. We can probably work out a combo kit that includes a popper base and plate. If this interest you while looking at this, let us know.
Small Shoot Through KYL
$40.00 - $75.00
KIT: Small Shoot Through KYL 2" - 1/4" Round .22 LR Rimfire only. 3/16" AR500 plate with .2'' added to the radius of each target size to allow for most of the bullet diameter to miss the normal gongs, but enough that it would move the normal gongs, The idea of this target is to put half a sheet of paper behind it as a score card and leave nothing but 8 clean holes through the piece of paper. We will eventually have printed score cards available for those that would like them.
Kit includes Shoot through plate, LT sawhorse brackets, 1 HD Rubber Strap, and hardware.
Kit does not include 3/4" IMC conduit legs or 2x4 cross board.
Basic 15 Degree Static Plate Kits
$220.00 - $280.00
These kits will include:
A our New PS Combo base for 2x4s and 1x2s, $115
A standard slotted plate hanger / post top, $65
A 3/8" AR500 slotted gong plate
The picture may not have the same size plate for the kit selected.
Not included, but needed for set up:
A 2x4, anything 4' or longer will work.
"Wheel of Misfortune" - Paper Only
$550.00
Our "Wheel of Misfortune" is part of our new Revolver Series of targets and has sparked a lot interest on social media.
This is for our basic paper only kit that uses up to 6 cardboard targets. Kit includes everything needed except for the wood and cardboard targets. Comes with 9" round plate for weight activator.
Other items needed to set this up:
1 - 2x4 about 4' long
6 - 1x2s 6' long
and cardboard targets.
Basic Gongs Kits
$120.00 - $200.00
These kits will include:
A set of our LT sawhorse stand brackets.
1 heavy duty rubber strap.
A pair of 1/2" grade 5 bolts w/ nuts and washers to attach straps to gong.
A pair of 1/2" lag bolts w/ washers to attach straps to 2x4.
A AR500 gong w/ 1/2" square holes
The picture may not have the same size plate for the kit selected.
Not included, but needed for set up:
4 Pieces of 3/4" conduit or black pipe at 3' minimum. We typically use 4-5' of 3/4" IMC electrical conduit. And if you drill the 5/16" holes in the ends of the pipes at 2.5" from the end, you can install the pins to hold the legs onto the brackets. This makes the stand a lot easier to set up with 1 person.
And a 2x4, anything 3' or longer will work. Longer will make your pipe legs last longer.
Large KYL 2" - 8" Kits
$225.00 - $290.00
Large KYL 2" - 8" Round Gong in 1" increments w/ 1/2" Square Holes - AR500.
RF is 3/16" AR500 recommended for LR rimfire only.
LT is 1/4" AR500 recommended for rimfire and small pistol. (Currently Unavailable)
HD is 3/8" AR500 recommended for centerfire, should be used at distance with larger calibers.
Kits include:
Either RF, LT or HD set of plates
LT sawhorse brackets
7 - HD rubber straps
7 - 1/2" carriage bolts with nuts and washers
7 - 1/2" lag bolts and washers
Small KYL 2" - 1/4" Kit
$250.00
Small KYL 2" - 1/4" Round Gong on 1/8" hangers.
Designed for .22LR ONLY, Velocities should be kept under 1300 FPS.
These are 1/8' cut plates with cold roll round stock welded to the end for the targets.
Kits include:
Small set of targets
LT sawhorse brackets
7 - 1" PVC spacers (You can add washers between, but not needed.)
2 - 1-1/6" Lock collars (Can be sent with 1" instead if you want to use 1" cold roll instead of conduit for the cross bar.)
Use 5' of 3/4" IMC electrical conduit for cross bar. And 3-5' long pieces for the legs. Drilling a 5/16" hole 2.5" from 1 end of each leg will allow the legs to be pinned on to the brackets. No additional hardware should be needed.
Clay Pigeon "Six Shooter"
$730.00
$695.00
Our clay pigeon "Six Shooter" is part of our new Revolver Series of targets and has sparked a lot interest on social media.
This is for 6 standard shotgun clays that uses 3 - 23" arms and 3 - 18" arms.
Other items needed to set this up:
1 - 2x4 about 4' long
Slotted Gong plate for activator weight.
Steel Plate "Six Shooter" - 8" Round
$850.00
$795.00
Our steel plate "Six Shooter" is part of our new Revolver Series of targets and has sparked a lot interest on social media.
This is for our standard 6 - 8" round steel plate kit that uses 6 steel knock off plates, 3 on 23" arms and 3 on 18" arms.
Kit includes everything needed except for the 2x4.
Other items needed to set this up:
1 - 2x4 about 4' long