First Class Target Systems
Free Shipping in the U.S. on all orders over $300
$25 flat shipping on all other orders.
$25 flat shipping on all other orders.
Slotted Gong Hangers
We have a wide variety of bracket designed for hanging our slotted gongs. All of our gong hangers have a very important and unique feature that sets us apart from everything else on the market, and that is that they don’t require any tools to set up and that they hold the plates at a negative 15-degree angle towards the ground without the use of any hardware. The basic ones are available for horizontal or vertical 2x4 applications and for a standard T post stake (like used for horse fences). Our HC (High Caliber) tops are available for vertical 2x4’s and T post stakes. With the horizontal version, you can build a static plate rack that doesn’t have to be reset.
We have a wide variety of bracket designed for hanging our slotted gongs. All of our gong hangers have a very important and unique feature that sets us apart from everything else on the market, and that is that they don’t require any tools to set up and that they hold the plates at a negative 15-degree angle towards the ground without the use of any hardware. The basic ones are available for horizontal or vertical 2x4 applications and for a standard T post stake (like used for horse fences). Our HC (High Caliber) tops are available for vertical 2x4’s and T post stakes. With the horizontal version, you can build a static plate rack that doesn’t have to be reset.
NEW - Vertical Flat Bar Hangers
$50.00 - $60.00
This NEW hanger system is going to be a game changer for clubs that run a lot of matches. This new system uses 3/8" x 1.5" flat bar instead of a 2x4. This means much longer lasting, no splintered wood, much longer time between service, and a much cleaner presentation of the plates.
We will also be adding these hanger options in their other respected areas so they appear with the other options we have for each application.
All parts will be painted black, the colors are just to help show how the system works.
NEW - Vertical No-Weld 2x4 Hangers
$50.00 - $60.00
This NEW hanger system is super easy to set up and take down with no tools needed after the initial lag bolted is added to the back of the 2x4. to set up you just have to drill a 3/8" pilot hole about 1.5" down from the top of the 2x4 on what will end up being the back and then install the provided 1/2" lag bolt leaving a flat side on the top. You can leave this sticking out some of you want, but we have not found that to be necessary so far.
We will also be adding these hanger options in their other respected areas so they appear with the other options we have for each application.
All parts will be painted black, the colors are just to help show how the system works.
Slotted Plate Hangers / Post Tops
$45.00 - $65.00
THIS IS FOR THE HANGERS ONLY.
High Caliber hangers with lock system have been switched to special order only, so send us an email if your interested in those. Thanks
PLATES ARE SOLD SEPARATELY.
Hostage DTP Post Tops / Hangers ONLY
$120.00 - $130.00
Hostage Targets - Horizontal or Vertical
Our hostage target uses DTP (Side to Dueling Tree Paddles) as the hostage taker. This target offers lots of great options for training and competition use. We design a head shaped DTP to be used with this system, but any of our other DTP’s can be used with it as well. The DTP-HD-79 is the 3/8” AR500 version of the head shaped paddle, but it is very difficult to flip it with a 9mm, so we are making it in 1/4" AR500 version as well (DTP-LT-79). You can get most of our DTP’s in either 1/4" or 3/8” AR500.
THIS IS FOR THE MAIN BRACKET THAT HOLDS THE PLATES.
PLATES ARE SOLD SEPARATELY.
Center Mass Hangers
Our CM (Center Mass) brackets are designed to hold multiple different plates for a wide variety of applications from a basic solid slotted gong plate, one of our several CM plate configuration options, they also have 2 options for knock down paddles, and the option to place a knock down target behind your front targets for a multi-hit target or use as a no shoot. These are available for horizontal or vertical 2x4 applications. The horizontal option also has a 1/2" square hole on the bottom for hanging other targets under it and this version can be used to build a portable plate rack that can fit in the trunk of a car, with the option to start with 1 or 2 and build up to as many as you want.
Hostage Targets
Our hostage target uses DTP (Dueling Tree Paddle) in the part number because it uses the same paddles that our dueling tree uses, along with most of the same options that our CM hangers offer. This target offers lots of great options for training and competition use. We design a head shaped DTP to be used with this system, but any of our other DTP’s can be used with it as well. The DTP-HD-79 is the 3/8” AR500 version of the head shaped paddle, but it is very difficult to flip it with a 9mm, so we are making it in 1/4" AR500 version as well (DTP-LT-79). You can get most of our DTP’s in either 1/4" or 3/8” AR500.
Our CM (Center Mass) brackets are designed to hold multiple different plates for a wide variety of applications from a basic solid slotted gong plate, one of our several CM plate configuration options, they also have 2 options for knock down paddles, and the option to place a knock down target behind your front targets for a multi-hit target or use as a no shoot. These are available for horizontal or vertical 2x4 applications. The horizontal option also has a 1/2" square hole on the bottom for hanging other targets under it and this version can be used to build a portable plate rack that can fit in the trunk of a car, with the option to start with 1 or 2 and build up to as many as you want.
Hostage Targets
Our hostage target uses DTP (Dueling Tree Paddle) in the part number because it uses the same paddles that our dueling tree uses, along with most of the same options that our CM hangers offer. This target offers lots of great options for training and competition use. We design a head shaped DTP to be used with this system, but any of our other DTP’s can be used with it as well. The DTP-HD-79 is the 3/8” AR500 version of the head shaped paddle, but it is very difficult to flip it with a 9mm, so we are making it in 1/4" AR500 version as well (DTP-LT-79). You can get most of our DTP’s in either 1/4" or 3/8” AR500.